In this post we will learn, how to setup self signed ssl certificate on Owncloud 6 in Ubuntu 14.04 LTS Server . The steps are almost same as we have done in post “Setup Owncloud 6 with self signed SSL certificate on Ubuntu 13.10

With the arrival of new Ubuntu version 14.04 LTS, there are few changes we have found so far. In my some previous post, I already stated that major change is defualt apache server is version 2.4 . Because we have now Apache 2.4 version, many new configuration parameters are introduced.

Follow the given below steps to setup self signed ssl certificate on Owncloud 6 in Ubuntu 14.04 LTS Server

Step 1 : Install Owncloud 6 on Ubuntu 14.04 LTS

We have already written a post on “How to install Owncloud 6 on Ubuntu 14.04 LTS Server” .
Go through with the post.

Description of our Server

Operating System : Ubuntu 12.04 LTS Server edition
Arch : x86_64
Apache version : 2.4.7
Owncloud Version : 6.0 (or 6.x)
Owncloud DocumetRoot path : /var/www/html/owncloud
Owncloud configuration File Path : /etc/apache2/sites-enabled/owncloud.conf

If you have already setup the owncloud 6 .Then kindly note the following things which may be you have to change as per your set up.

1. DocumentRoot of owncloud
2. Path of Apache Owncloud configuration file

Step 2 : Install OpenSSL package

To create ssl certificate we require OpenSSL package. Hence install it with given below command

sudo apt-get install openssl

Step 3 : Enable ssl and rewrite module

Now enable the two apache module i.e SSL and Rewrite module

sudo a2enmod ssl
sudo a2enmod rewrite

Step 4 : Create Self signed Certificate

Now create a self signed certificate to be used in Owncloud setup.
We will first create a seperate directory so that we will keep the SSL keys there

sudo mkdir -p /etc/apache2/ssl 

Now use the below given one liner command to create self signed certificate. Write the answers which will asked during certiciate creation

sudo openssl req -new -x509 -days 365 -nodes -out /etc/apache2/ssl/owncloud.pem -keyout /etc/apache2/ssl/owncloud.key

Note: The above certificate is valid for 365 days. We have mentioned validity days in the command.

The below given is reference from my system. Kindly consider it as an example

sharad@ubuntu:~$ sudo openssl req -new -x509 -days 365 -nodes -out /etc/apache2/ssl/owncloud.pem -keyout /etc/apache2/ssl/owncloud.key
Generating a 2048 bit RSA private key
.........................+++
..................................................................+++
writing new private key to '/etc/apache2/ssl/owncloud.key'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:IN
State or Province Name (full name) [Some-State]:AP
Locality Name (eg, city) []:HYD
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Example Pvt. Ltd
Organizational Unit Name (eg, section) []:IT
Common Name (e.g. server FQDN or YOUR name) []:example.com
Email Address []:admin@example.com
sharad@ubuntu:~$ 

IP Based Or Name based Virtual Hosting

We have two ways to configure either IP based or Name based. In this tutorial, we are pasting the configuration for both . USE ONLY ONE METHOD EITHER IP BASED OR NAME BASED, DO NOT CONFIGURE BY BOTH METHOD

NOTE: Kindly do the changes as per your server information. Specifically the below given values

1. Domain name = replace example.com with your domain/sub-domain name
2. IP Address = In case, you want to configure IP based. Then use the IP address of your server and replace with 192.168.56.101
3. DocumentRoot = Get the absolute path of Owncloud directory in default Apache’s data dir. In our setup we are using, /var/www/html/owncloud . Hence replace it if yours path is different
4. Owncloud config file = In our setup we have placed the owncloud.conf file in path /etc/apache2/sites-enabled//etc/apache2/sites-enabled/owncloud.conf . Hence check your Owncloud configuration path.

Setup IP Based Apache Configuration

Edit your owncloud configuration file located in Apache’s configuration directory. As we stated earlier, our owncloud.conf file is located in /etc/apache2/sites-enabled/owncloud.conf .

Edit the file /etc/apache2/sites-enabled/owncloud.conf as given below for IP based apache configuration

sudo vi /etc/apache2/sites-enabled/owncloud.conf 

 
#### Redirect to port 443 ###
RewriteEngine on
ReWriteCond %{SERVER_PORT} !^443$
RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L]
#### End of Redirection configuration ###
 
DocumentRoot /var/www/html/owncloud/

    Options Indexes FollowSymLinks MultiViews
    AllowOverride All
    Require all granted

 

 

 
####Configuration for SSL #####
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/owncloud.pem
SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key
#### End of SSL Configuration ####
 
DocumentRoot /var/www/html/owncloud/

    Options Indexes FollowSymLinks MultiViews
    AllowOverride All
    Require all granted


Now restart apache service

sudo service apache2 restart

OR Setup Name Based Apache Configuration

For name based we require domain name or sub domain name. In DNS settings resolve the Server IP address to your domain name in host record.

First edit the apache2.conf file and search the parameter HostnameLookups and enable it by replacing off to on

vi /etc/apache2/apache2.conf
HostnameLookups On

Save and exit from file

Now use the given below settings for Name based apache configuration. Replace example.com with your domain name. Edit the file owncloud.conf file

sudo vi /etc/apache2/sites-enabled/owncloud.conf 

ServerName example.com
ServerAlias www.example.com
 
RewriteEngine on
ReWriteCond %{SERVER_PORT} !^443$
RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L]
 

    Options Indexes FollowSymLinks MultiViews
    AllowOverride All
    Require all granted

 

 

ServerName example.com
ServerAlias www.example.com
 
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/owncloud.pem
SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key
DocumentRoot /var/www/html/owncloud/

    Options Indexes FollowSymLinks MultiViews
    AllowOverride All
    Require all granted


Save and exit from file

Restart the Apache service

sudo service apache2 restart

Open the Owncloud URL in web browser

Open the web browser and in address bar type the domain name or IP address . Replace the example.com or 192.168.56.101 with your domain name and server’s ip address.

https://example.com

OR

https://192.168.56.101

In configuration we have redirected the traffic coming to port 80 to port 443 . Hence, even using only HTTP in URL it will be redirected to HTTPS

owncloud-ssl-1

owncloud-ssl-2

owncloud-ssl-3-example

Read Some More Articles

10 Comments

  1. You did a great job with this and the other owncloud posts. Really thank you so much for the ssl information as that is a great job.

    1. Thankyou mrswails,

      Appreciation from readers , works as booster for blogger.
      Glad to hear, the post really working for Owncloud users. I love the Owncloud, it rocks!

      Regards
      Sharad

  2. Hi Sharad,

    Just installed OwnCloud 7 on Ubuntu 14.04 LTS, with SSL added. Excellent tutorial. Worked first time. Very well laid out and informative step by step instructions. Cannot wait for more of your tutorials. Thanks..:)

    1. Hello Jeanmi,

      Awesome, Thankyou for commenting and giving me feedback. Really I am glad to know the posts is useful for you.
      I assure you, some more awesome tutorials and learning material you will read.

      Regards
      Sharad

  3. Hi sharadchhetri
    Did you have a problem when changing email templates via the Admin panel – ‘could not create directory’, when trying to save any changes…

    1. I have not seen this problem. But, it seems permission issue.
      chown -R apache:apache /var/www/owncloud

      Try this, change the path of Owncloud in above command.

      Let me know if still issue persist
      I will recheck on my server. Let me know as well how you are doing it. It will help me in troubleshooting.

      Regards
      Sharad

      1. You my friend are a genius !…I entered ‘sudo chown -R www-data:www-data /var/www/owncloud’…and it’s now working perfectly.
        Seriously a big thank you for your advice, help & prompt reply.

        Many Many thanks

  4. Thankyou RobM,

    I am very happy to know the post is helping many users.

    Thanks and Regards
    Sharad

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.